main:
{
    //logging to dim server when dimservername !=""
        
    dimservername = "GAS_FUCHUR";
    
};


# =============================================================================
# 1st Orbisphere (510)
# =============================================================================

# AIN1_1:
# { 
#  dimservicename ="GAS_ORB510_O2_PPM";
#  type = 3;
#  range = (0. , 1000.);
# };

AIN1_1:
{ 
 dimservicename ="GAS_ORB510_O2_PPM";
 type = 4;
 range = (0. , 500., 10000., 1000000.);
 division = (10., 15.);
};

AIN1_3:
{ 
 dimservicename ="GAS_ORB510_TEMP";
 type = 3;
 range = (0. , 65.);
};

AIN1_5:
{ 
 dimservicename ="GAS_ORB510_ABS_PRESSURE";
 type = 3;
 range = (0. , 1200.);
};

AIN1_7:
{ 
 dimservicename ="GAS_ORB510_REL_PRESSURE";
 type = 3;
 range = (-10. , 10.);
};

# =============================================================================
# 2nd Orbisphere (410)
# =============================================================================

# AIN1_2:
# { 
#  dimservicename ="GAS_ORB410_O2_PPM";
#  type = 3;
#  range = (0. , 1000.);
# };

AIN1_2:
{ 
 dimservicename ="GAS_ORB410_O2_PPM";
 type = 4;
 range = (0. , 500., 10000., 1000000.);
 division = (10., 15.);
};

AIN1_4:
{ 
 dimservicename ="GAS_ORB410_TEMP";
 type = 3;
 range = (0. , 65.);
};

AIN1_6:
{ 
 dimservicename ="GAS_ORB410_ABS_PRESSURE";
 type = 3;
 range = (0. , 1200.);
};

AIN1_8:
{ 
 dimservicename ="GAS_ORB410_REL_PRESSURE";
 type = 3;
 range = (-10. , 10.);
};


# =============================================================================
# Gas flow meter for double layer tests
# =============================================================================


AIN2_1:
{ 
 dimservicename ="GAS_GFM_Layer01_Nl_per_h";
 type = 3;
 range = ( 0., 100.);
};
 
AIN2_2:
{ 
 dimservicename ="GAS_GFM_Layer23_Nl_per_h";
 type = 3;
 range = ( 0., 100.);
};
 
AIN2_3:
{ 
 dimservicename ="GAS_GFM_Layer45_Nl_per_h";
 type = 3;
 range = ( 0., 100.);
};

# =============================================================================
# Gas bottles
# =============================================================================

AIN3_1:
{ 
 dimservicename ="GAS_PRESSURE_CO2_1";
 type = 3;
 range = ( 0., 250. );
};

AIN3_2:
{ 
 dimservicename ="GAS_PRESSURE_CO2_2";
 type = 3;
 range = ( 0., 250. );
};

AIN3_3:
{ 
 dimservicename ="GAS_PRESSURE_AR_1";
 type = 3;
 range = ( 0., 250. );
};

AIN3_4:
{ 
 dimservicename ="GAS_PRESSURE_AR_2";
 type = 3;
 range = ( 0., 250. );
};


#==============================================================================
#underpressure test of cooling
#==============================================================================

AIN2_4:
{
 dimservicename = "COOLING_TEST_PRESSURE";
 type = 3;
 range = (0., 2000. );

};