#
# $Id$:
#
#
# I/O attributes
#
# driving strength for single ended only, for LVDS is 24
# -OUT_DRIVE 2|4|6|8|12|16|24 # mA
#
# output slew rate for single ended only
# -SLEW High|Low
#
# output load in pF for single ended only
# -OUT_LOAD n
#
# use the register in the IO cell
# -REGISTER Yes|No
#
# use Schmitt trigger for single ended only
# -SCHMITT_TRIGGER On|Off
#
# input delay
# -IN_DELAY Off|0|1|2|3|4|5|6|7

set_io ADC_CSn          -OUT_DRIVE 12 -SLEW Low
set_io ADC_SCLK         -OUT_DRIVE 12 -SLEW Low
set_io ADC_SDO          -SCHMITT_TRIGGER On
set_io ADC_SDI          -SLEW Low
set_io CNRRL            -OUT_DRIVE 12 -SLEW Low
set_io LED(1)           -SLEW Low
set_io LED(2)           -SLEW Low
set_io LED_SIU(1)       -SLEW Low
set_io LED_SIU(2)       -SLEW Low
set_io LED_SIU(3)       -SLEW Low
set_io LED_SIU(4)       -SLEW Low
set_io PUSHB            -RES_PULL Up -SCHMITT_TRIGGER On
set_io RESET_TOFFPGA    -SLEW Low
set_io RST_n            -RES_PULL Up -SCHMITT_TRIGGER On
set_io SCL_ID           -SLEW Low -RES_PULL Up
set_io SDA_ID           -SLEW Low -RES_PULL Up -SCHMITT_TRIGGER On
set_io SFPP_SCLK        -SLEW Low
set_io SFPP_SCSn        -SLEW Low
set_io SFPP_SDO         -SCHMITT_TRIGGER On
set_io SFP_PRESENT      -RES_PULL Up -SCHMITT_TRIGGER On
set_io SFP_TX_DIS       -SLEW Low
set_io SFP_TX_FAULT     -RES_PULL Up -SCHMITT_TRIGGER On
set_io SIU_ENABLE       -SLEW Low
set_io SIU_LCKREFN      -SLEW Low
set_io SIU_LOOPEN       -SLEW Low
set_io SIU_PRBSEN       -SLEW Low
set_io SIU_RXCLK        -IN_DELAY off
# 3 for 1500, 4 for 3000 - check if 3 is good for 3000!
set_io SIU_RXD(0)       -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(1)       -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(2)       -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(3)       -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(4)       -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(5)       -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(6)       -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(7)       -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(8)       -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(9)       -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(10)      -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(11)      -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(12)      -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(13)      -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(14)      -REGISTER Yes -IN_DELAY 3
set_io SIU_RXD(15)      -REGISTER Yes -IN_DELAY 3
set_io SIU_RXDV         -REGISTER Yes -IN_DELAY 3
set_io SIU_RXER         -REGISTER Yes -IN_DELAY 3
set_io SIU_SCL          -SLEW Low -RES_PULL Up
set_io SIU_SDA          -SLEW Low -RES_PULL Up -SCHMITT_TRIGGER On
set_io SIU_TXD(0)       -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(1)       -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(2)       -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(3)       -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(4)       -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(5)       -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(6)       -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(7)       -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(8)       -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(9)       -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(10)      -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(11)      -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(12)      -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(13)      -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(14)      -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXD(15)      -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXEN         -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io SIU_TXER         -OUT_DRIVE 24 -SLEW High -OUT_LOAD 8 -REGISTER Yes
set_io TLMU_n(0)        -IN_DELAY 1
set_io TLMU_n(1)        -IN_DELAY 1
set_io TLMU_n(2)        -IN_DELAY 1
set_io TLMU_n(3)        -IN_DELAY 1
set_io TLMU_n(4)        -IN_DELAY 1
set_io TLMU_n(5)        -IN_DELAY 1
set_io TLMU_n(6)        -IN_DELAY 1
set_io TLMU_n(7)        -IN_DELAY 1
set_io TLMU_p(0)        -IN_DELAY 1
set_io TLMU_p(1)        -IN_DELAY 1
set_io TLMU_p(2)        -IN_DELAY 1
set_io TLMU_p(3)        -IN_DELAY 1
set_io TLMU_p(4)        -IN_DELAY 1
set_io TLMU_p(5)        -IN_DELAY 1
set_io TLMU_p(6)        -IN_DELAY 1
set_io TLMU_p(7)        -IN_DELAY 1
set_io TSENS            -SLEW Low -RES_PULL Up -SCHMITT_TRIGGER On
set_io WP_ID            -SLEW Low -RES_PULL Up